Tondi Fiori collection by Weronika Rosa is printed on a premium quality non-woven backing wallcovering. We recommend that a professional wallpaper hanger installs Weronika Rosa’s wallcoverings.

The full panoramic artwork is composed of 3 stripes. Stripes are: 50 cm large (Golden & Silver sand) and 46,5 cm large (Pearl). All strips are identified by a number on their upper side. These strips must be applied in numerical order from left to right. Each strip to follow has been turned through 180˚ to avoid any possible difference in colour. 

Strips should be placed flat on a clean surface first. Make sure to check your order. If you see anything out of the ordinary, please contact us before the installation. We do not accept any liability for stripes once they have been attached to the wall.

Prior to use, please check the wall for possible defects or damage. The surface must be: dry, smooth, clean, of a uniformly absorbent quality and of uniform colour. Rough surfaces, holes, and uneven spots should be levelled out.

Make a vertical line with a plumb line on the left edge of the area you want to cover with the mural. This line is very important because it is the guide to start placing your mural. Spread the paste with a brush or a paint roller across the wall. Apply the paste across an area slightly wider than one strip. We recommend to use a special duty paste for non-woven wallpapers. Attach the first strip in a vertical direction and press it against the wall by means of a rubber roller or soft cloth to avoid possible air bubbles. All following strips must be butt-jointed.  Clean the excess glue with a damp sponge immediately and dab dry. With the help of a ruler and a cutter, adjust the sides, the top and bottom of the wall, if necessary. 

Let the wall dry for 24 hours and enjoy the final result.

For any additional questions, please feel free to contact us: info@weronikarosa.com.